The following steps must be taken when installing onto an LPAR.
Log in on the Hardware Master Console (HMC) or the Support Element Workplace (SEW) as a user with sufficient privileges to install a new OS to an LPAR. The SYSPROG user is recommended.
Select Images, then select the LPAR to which you wish to install. Use the arrows in the frame on the right side to navigate to the CPC Recovery menu.
Double-click on Load from CD-ROM or Server.
In the dialog box that follows, select Local CD-ROM then click Continue.
In the dialog that follows, keep the default selection of generic.ins then click Continue.
Skip to Section 16.9, “Installing in an LPAR (Common Steps)” to continue.