Chapter 4. Configuring Red Hat Cluster With system-config-cluster
This chapter describes how to configure Red Hat Cluster software using system-config-cluster, and consists of the following sections:
-
Section 4.1, “Configuration Tasks”
-
Section 4.2, “Starting the Cluster Configuration Tool”
-
Section 4.3, “Naming The Cluster”
-
Section 4.4, “Configuring Fence Devices”
-
Section 4.5, “Adding and Deleting Members”
-
Section 4.6, “Configuring a Failover Domain”
-
Section 4.7, “Adding Cluster Resources”
-
Section 4.8, “Adding a Cluster Service to the Cluster”
-
Section 4.9, “Propagating The Configuration File: New Cluster”
-
Section 4.10, “Starting the Cluster Software”