Chapter 2. Configuring Red Hat Cluster With Conga
This chapter describes how to configure Red Hat Cluster software using Conga, and consists of the following sections:
-
Section 2.1, “Configuration Tasks”
-
Section 2.2, “Starting luci and ricci”.
-
Section 2.3, “Creating A Cluster”
-
Section 2.4, “Global Cluster Properties”
-
Section 2.5, “Configuring Fence Devices”
-
Section 2.6, “Configuring Cluster Members”
-
Section 2.7, “Configuring a Failover Domain”
-
Section 2.8, “Adding Cluster Resources”
-
Section 2.9, “Adding a Cluster Service to the Cluster”
-
Section 2.10, “Configuring Cluster Storage”